Dewalt D25851K TYPE 1 Zeichnungen und Teile
Auf dem Typenschild sollte die Typenbezeichnung D25851K TYPE 1 stehen. Je nach Typenbezeichnung kann es Unterschiede geben, die dazu führen können, dass Teile nicht passen. Bestellen Sie nur, wenn diese Nummer übereinstimmt.Zeichnungen der DEWALT D25851K TYPE 1
Teileliste der Dewalt D25851K TYPE 1
Auf dieser Seite können Sie Teile in den Einkaufswagen legen, indem Sie die Anzahl auswählen und dann auf die Schaltfläche dahinter klicken. Wenn Sie die Auswahl der richtigen Teile abgeschlossen haben, können Sie auf den Button ' Zum Einkaufswagen' unten auf der Seite klicken. Die folgenden Preise verstehen sich inklusive Mehrwertsteuer.
| SA COMBIHSG CHIPPER (SERVICE) | ||||
| 3 | N082756 | SA COMBIHSG CHIPPER (SERVICE) | € 18.37 | |
| BEARING, BALL | ||||
| 4 | 330003-39 | BEARING, BALL | € 6.04 | |
| RING, SEALING 24 7 14 | ||||
| 5 | 327141-03 | RING, SEALING 24 7 14 | € 8.65 | |
| RING | ||||
| 6 | 577746-00 | RING | € 1.66 | |
| SCREW, PLASTIC THREAD FORM M4*50 | ||||
| 9 | 330065-21 | SCREW, PLASTIC THREAD FORM M4*50 | € 1.38 | |
| TAB, DOUBLE | ||||
| 11 | 1007970-00 | TAB, DOUBLE | € 1.66 | |
| KUGELLAGER | ||||
| 20 | 330003-60 | KUGELLAGER | € 4.78 | |
| HUELSE | ||||
| 21 | 1007732-00 | HUELSE | € 1.66 | |
| BRUSH BRIDGE (MOULD) | ||||
| 22 | 1007798-00 | BRUSH BRIDGE (MOULD) | € 8.65 | |
| FAN BAFFLE, STD FEAT | ||||
| 26 | N016920 | FAN BAFFLE, STD FEAT | € 6.04 | |
| SCHRAUBE | ||||
| 27 | 330065-08 | SCHRAUBE | € 1.38 | |
| SA FAN (WITH MAGNET) | ||||
| 28 | 1006592-01 | SA FAN (WITH MAGNET) | € 13.42 | |
| SCREW, M5 X 12" | ||||
| 29 | 324119-02 | SCREW, M5 X 12" | € 2.67 | |
| SH STD END CAP (MOULD) | ||||
| 40 | 1008683-00 | SH STD END CAP (MOULD) | € 9.20 | |
| MOTOR COVER CHIPPER 5 KG (MOULD) | ||||
| 41 | 1006576-01 | MOTOR COVER CHIPPER 5 KG (MOULD) | € 11.04 | |
| AP SCREW M5X60 | ||||
| 49 | 1005672-00 | AP SCREW M5X60 | € 4.50 | |
| HANDLE PLATE STD FEAT | ||||
| 50 | 1007939-00 | HANDLE PLATE STD FEAT | € 12.49 | |
| SPRING, ANTIVIB 5KG | ||||
| 60 | 1007569-00 | SPRING, ANTIVIB 5KG | € 2.47 | |
| SLIDING BUSH 5 KG | ||||
| 61 | 1007567-00 | SLIDING BUSH 5 KG | € 3.50 | |
| LIMIT STOP - 5KG | ||||
| 62 | 1007566-00 | LIMIT STOP - 5KG | € 9.20 | |
| FOLD BELOW-UPPER, 5KG | ||||
| 63 | 1007565-00 | FOLD BELOW-UPPER, 5KG | € 4.13 | |
| MSH STD CHIPPER HANDLE HSG (MOULD) | ||||
| 64 | 1008681-01 | MSH STD CHIPPER HANDLE HSG (MOULD) | € 9.20 | |
| TRIGGER TOGGLE (MOULD) | ||||
| 65 | 488065-01 | TRIGGER TOGGLE (MOULD) | € 4.13 | |
| SWITCH, MSH | ||||
| 66 | 581070-01 | SWITCH, MSH | € 20.07 | |
| MSH-STD HANDLE COVER OVERMOULD (MOULD) | ||||
| 67 | 1008682-00 | MSH-STD HANDLE COVER OVERMOULD (MOULD) | € 12.49 | |
| GROUND CONNECTOR | ||||
| 70 | N015311 | GROUND CONNECTOR | € 1.66 | |
| SCREW, M4 X 8 DIN6900 | ||||
| 71 | 326619-00 | SCREW, M4 X 8 DIN6900 | € 1.66 | |
| SCREW, M4 X 8 DIN6900 | ||||
| 76 | 326619-00 | SCREW, M4 X 8 DIN6900 | € 1.66 | |
| FOLD BELOW-LOWER, 5KG | ||||
| 80 | 1008678-00 | FOLD BELOW-LOWER, 5KG | € 4.78 | |
| HANDLE BUSH (PURCH) | ||||
| 81 | N038214 | HANDLE BUSH (PURCH) | € 1.38 | |
| PIN HANDLE | ||||
| 82 | N062047 | PIN HANDLE | € 1.38 | |
| SCHR TORX | ||||
| 83 | 324007-11 | SCHR TORX | € 1.38 | |
| CLAMP, CORD | ||||
| 85 | 821070 | CLAMP, CORD | € 1.38 | |
| KABELTUELLE | ||||
| 86 | 323091-01 | KABELTUELLE | € 5.35 | |
| CORDSET COVER 5KG (MOULD) | ||||
| 88 | 1008391-00 | CORDSET COVER 5KG (MOULD) | € 3.65 | |
| LIGHT, GUIDE (STD FEAT) (MOULD) | ||||
| 90 | N021606 | LIGHT, GUIDE (STD FEAT) (MOULD) | € 2.67 | |
| DUST CAP 5KG SPLINE | ||||
| 100 | N049332 | DUST CAP 5KG SPLINE | € 6.04 | |
| SPLINE- SPANRING | ||||
| 101 | 487205-01 | SPLINE- SPANRING | € 1.66 | |
| SPLINE- BUSH FIXED | ||||
| 102 | 1008282-00 | SPLINE- BUSH FIXED | € 7.34 | |
| RING CLIP | ||||
| 103 | N058328 | RING CLIP | € 2.47 | |
| SPLINE- SLIDING TUBE (W/O STEEL RING) | ||||
| 104 | 1008281-00 | SPLINE- SLIDING TUBE (W/O STEEL RING) | € 10.10 | |
| SPLINE- CROSS BOLT 9.5x35 | ||||
| 105 | 1008264-00 | SPLINE- CROSS BOLT 9.5x35 | € 5.35 | |
| SPRING.CPRSN 2.2/47. | ||||
| 106 | 323395-06 | SPRING.CPRSN 2.2/47. | € 1.38 | |
| GUIDE,CONICAL FLAT | ||||
| 107 | N313860 | GUIDE,CONICAL FLAT | € 6.59 | |
| SA TOOLHOLDER NEW MSH (SERVICE) | ||||
| 108 | N080645 | SA TOOLHOLDER NEW MSH (SERVICE) | € 67.38 | |
| ROLLER 6x8 (FROM ROLLER BEARING) | ||||
| 109 | 1008275-00 | ROLLER 6x8 (FROM ROLLER BEARING) | € 1.38 | |
| SPLINE, CLIP | ||||
| 110 | N021036 | SPLINE, CLIP | € 2.93 | |
| SPLINE- RING LOCKING | ||||
| 111 | 1008280-00 | SPLINE- RING LOCKING | € 2.93 | |
| SCREW, CYL M6 40 / 12..9 | ||||
| 112 | 918825-02 | SCREW, CYL M6 40 / 12..9 | € 1.66 | |
| FRONT COVER 5KG (MOULD) | ||||
| 113 | 1006572-00 | FRONT COVER 5KG (MOULD) | € 6.59 | |
| WAVE SPRING TOOLH. HEX | ||||
| 117 | N075956 | WAVE SPRING TOOLH. HEX | € 8.65 | |
| FELT 31X52 | ||||
| 119 | N038151 | FELT 31X52 | € 2.93 | |
| BUSH FELT | ||||
| 120 | N045793 | BUSH FELT | € 2.93 | |
| SEAL SPINDLE 32X42X7/9 | ||||
| 122 | 1007828-00 | SEAL SPINDLE 32X42X7/9 | € 12.49 | |
| SA FRONT HOUSING 5KG (SERVICE) | ||||
| 123 | N041835 | SA FRONT HOUSING 5KG (SERVICE) | € 40.29 | |
| WASHER DAMPER 5KG | ||||
| 126 | 1005982-00 | WASHER DAMPER 5KG | € 1.38 | |
| DAMPER SPINDLE 5KG | ||||
| 127 | 496191-00 | DAMPER SPINDLE 5KG | € 3.65 | |
| SA SPINDLE NEW MSH (SERVICE) | ||||
| 128 | N080644 | SA SPINDLE NEW MSH (SERVICE) | € 83.42 | |
| BEAT PIECE 5KG NOT ASSMBLED (SERVICE) | ||||
| 129 | N041847 | BEAT PIECE 5KG NOT ASSMBLED (SERVICE) | € 40.29 | |
| BEATPIECE NMSH SEALING | ||||
| 130 | N244259 | BEATPIECE NMSH SEALING | € 16.52 | |
| O'RING 19 X 3.5 | ||||
| 131 | 323711-10 | O'RING 19 X 3.5 | € 2.93 | |
| WASHER 18.5 | ||||
| 135 | N064329 | WASHER 18.5 | € 1.66 | |
| RING, SPINDLE LOCK | ||||
| 140 | 494857-00 | RING, SPINDLE LOCK | € 4.50 | |
| GASKET, MAIN HOUSING/FROT HOUSING | ||||
| 141 | 1006283-00 | GASKET, MAIN HOUSING/FROT HOUSING | € 4.78 | |
| SPRING 2X40.2 | ||||
| 142 | 1005748-00 | SPRING 2X40.2 | € 2.93 | |
| O-RING,16X6 HNBR 80 | ||||
| 143 | N210233 | O-RING,16X6 HNBR 80 | € 4.13 | |
| BUSH, CYLINDER (USE EXISTING MSH) | ||||
| 144 | 1006778-00 | BUSH, CYLINDER (USE EXISTING MSH) | € 2.93 | |
| CYLINDER 31X35 (SERVICE) | ||||
| 145 | N041846 | CYLINDER 31X35 (SERVICE) | € 26.26 | |
| O RING, 26 X 2 HNBR | ||||
| 146 | 577744-00 | O RING, 26 X 2 HNBR | € 4.50 | |
| RAM 5KG (SERVICE) | ||||
| 147 | N041845 | RAM 5KG (SERVICE) | € 23.61 | |
| O RING, FPM 23 X 4" | ||||
| 148 | 576232-01 | O RING, FPM 23 X 4" | € 7.34 | |
| SLEEVE SHIFTING 5KG (SERVICE) | ||||
| 149 | N041844 | SLEEVE SHIFTING 5KG (SERVICE) | € 15.52 | |
| FORK SHIFTING 5KG | ||||
| 150 | 1005749-00 | FORK SHIFTING 5KG | € 2.93 | |
| RING, PISTON D=25.6" | ||||
| 161 | 325905-00 | RING, PISTON D=25.6" | € 2.47 | |
| NEEDLE, PIN 8 X 24" | ||||
| 162 | 330041-22 | NEEDLE, PIN 8 X 24" | € 3.65 | |
| PISTON (SERVICE) | ||||
| 163 | N041843 | PISTON (SERVICE) | € 9.20 | |
| CONNECT. ROD (DIFFERENT BORE DIA) | ||||
| 164 | 494724-00 | CONNECT. ROD (DIFFERENT BORE DIA) | € 6.59 | |
| SIDE COVER AL, RIGHT - 5KG | ||||
| 165 | 1006721-00 | SIDE COVER AL, RIGHT - 5KG | € 11.04 | |
| KNOB MODE CHANGE 5KG | ||||
| 166 | 1006786-00 | KNOB MODE CHANGE 5KG | € 3.65 | |
| SPERRKLINKE | ||||
| 167 | 326467-00 | SPERRKLINKE | € 1.38 | |
| DECKEL | ||||
| 168 | 1006575-01 | DECKEL | € 7.34 | |
| O-RING 8X2.2 | ||||
| 169 | 323711-57 | O-RING 8X2.2 | € 1.38 | |
| ECCENTRIC 5KG | ||||
| 172 | 496856-00 | ECCENTRIC 5KG | € 1.38 | |
| SLIDER SPRING 5KG | ||||
| 180 | 1006784-00 | SLIDER SPRING 5KG | € 2.93 | |
| SPRING, PRESSURE | ||||
| 181 | 323395-32 | SPRING, PRESSURE | € 1.38 | |
| CONNECTOR 5KG | ||||
| 182 | 1006783-00 | CONNECTOR 5KG | € 1.66 | |
| COVER CRANK 5KG | ||||
| 183 | 496857-00 | COVER CRANK 5KG | € 6.04 | |
| RING,O 65X3.5 | ||||
| 184 | 323711-59 | RING,O 65X3.5 | € 1.66 | |
| PLATE, CRANK | ||||
| 185 | 1006785-00 | PLATE, CRANK | € 3.50 | |
| SA CRANK SHAFT 5KG (SERVICE) | ||||
| 186 | N041841 | SA CRANK SHAFT 5KG (SERVICE) | € 52.57 | |
| O RING, 5X1.2" | ||||
| 187 | 323711-26 | O RING, 5X1.2" | € 1.38 | |
| SA MAIN HSG 5KG CHIPPER (SERVICE) | ||||
| 188 | N082641 | SA MAIN HSG 5KG CHIPPER (SERVICE) | € 67.38 | |
| BEARING, BALL 6001 | ||||
| 190 | 577745-01 | BEARING, BALL 6001 | € 9.20 | |
| BEARING, NEEDLE 22X30X13 | ||||
| 191 | 586301-00 | BEARING, NEEDLE 22X30X13 | € 10.10 | |
| O-RING 8X2.2 | ||||
| 192 | 323711-57 | O-RING 8X2.2 | € 1.38 | |
| PLUG, SCREW | ||||
| 193 | 1008427-00 | PLUG, SCREW | € 3.50 | |
| SIDE COVER AL, LEFT - 5KG | ||||
| 201 | 1006720-00 | SIDE COVER AL, LEFT - 5KG | € 11.04 | |
| GASKET, MAIN HOUSING/GEAR HOUSING | ||||
| 206 | 1006282-00 | GASKET, MAIN HOUSING/GEAR HOUSING | € 6.04 | |
| GRIFF | ||||
| 220 | 487277-00 | GRIFF | € 18.37 | |
| SA KNOB | ||||
| 223 | 487291-00 | SA KNOB | € 7.34 | |
| SCREW, M8X185 | ||||
| 225 | 487343-00 | SCREW, M8X185 | € 6.04 | |
| KLEMMSTÜCK | ||||
| 226 | 479319-00 | KLEMMSTÜCK | € 1.38 | |
| WASHER, LOCKING | ||||
| 227 | 479317-00 | WASHER, LOCKING | € 2.47 | |
| CLAMP WASHER | ||||
| 228 | N021994 | CLAMP WASHER | € 5.35 | |
| CLAMP | ||||
| 229 | N021995 | CLAMP | € 7.34 | |
| SA SIDE HANDLE CHIPPER (SERVICE) | ||||
| 250 | N073104 | SA SIDE HANDLE CHIPPER (SERVICE) | € 35.05 | |
| GREASE,SACHET 20G,RENOLIT PARAGON EP 1/" | ||||
| 800 | 870889-03 | GREASE,SACHET 20G,RENOLIT PARAGON EP 1/" | € 5.35 | |
| OIL BOTTLE 90ml | ||||
| 810 | N040237 | OIL BOTTLE 90ml | € 20.07 | |
| LABEL BRAND NEW MSH | ||||
| 816 | N064908 | LABEL BRAND NEW MSH | € 1.38 | |
| SERVICE TOOL | ||||
| 836 | 1003938-99 | SERVICE TOOL | € 165.13 | |
| SERVICE TOOL | ||||
| 837 | 559645-99 | SERVICE TOOL | € 124.68 | |
| SA KITBOX MSH DEMO WITH HANDLE | ||||
| 861 | 574931-23 | SA KITBOX MSH DEMO WITH HANDLE | € 65.72 | |
Es befinden sich 0 Artikel in Ihrem Einkaufswagen.